In Port Setup change CommPTT to NO.
73,
Gary AL9A
----- Original Message -----
From: <nx0i@aol.com>
To: <WriteLog@contesting.com>
Sent: March 23, 2011 5:48 AM
Subject: [WriteLog] Writelog 10.84D & Icom 775DSP with Windows 7
> Anyone,
>
>
>
> I have been using Writelog for several years and just recently
> installed version 10.84D on a new PC running Windows 7 Pro.
> The problem I am having and I am having the same problem with N1MM is
> that I cannot get Writelog to see my ICOM 775.
> I am using a Serial to USB converter for my CT-17. Icom is assigned
> to Com2 9600,n,8.1,x in both my PC & Writelog.ini file.
> My radio is assigned to 9600 baud & 46h address. These settings are
> working great with DXBASE 2007. It controls the radio with no problems.
> When I go into ports on Writelog and tell it Com2 -
> ICOM775 -9600baud - polling - Sync it comes up and says "NO RIG!"
> I have also tried different baud rates 4800, 19200 etc. with no
> success.
> I have set everything up from the setting in my old XP machine and
> like I said DXBASE2007 see's my radio but not Writelog.
> I have edited the correct Writelog.ini file, not the one in the
> Windows folder and when I make changes, it seems to be seeing the changes.
> I am also using a Signalink & Winkeyer2. These are working with no
> issues but not in Writelog.
> Any suggestions would be greatly appreciated from a long time
> Writelog user.
>
>
> Jerry, NX0I
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|