WriteLog
[Top] [All Lists]

Re: [WriteLog] Writelog/Microham/TS2000x

To: <writelog@contesting.com>
Subject: Re: [WriteLog] Writelog/Microham/TS2000x
From: kp hpjr <inservice2him@hotmail.com>
Date: Sat, 10 Sep 2011 14:48:25 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Thank for the pointers.

I have it going!

KK

> From: inservice2him@hotmail.com
> To: writelog@contesting.com
> Date: Sat, 10 Sep 2011 09:03:19 -0500
> Subject: [WriteLog] Writelog/Microham/TS2000x
> 
> 
> Trying to get my TS-2000x to work in WL using my MicroHam MicroKeyer.
> 
> Using WL 10.86C. I do have the rig tracking freq info on Com9 @ 9600 baud. 
> That sems to work fine.
> 
> What I can not figure out is how to get the CW to send. I have tried various 
> combination's of settings. The best I get is a steady tone to lock up. There 
> is no PTT TX happening at all.
> 
> My settings on the MicroHam router (Version7.7.1)  are:
> CAT=Com9
> FSK=Com10 (PTT is checked here)
> CW=com11
> PTT=Com12
> 
> My trouble lies on the Writelog "Port setup -- What is connected? screen" I'm 
> not sure what combination is needed to get this thing to fly. Any help would 
> be much appreciated.
> 
> Kirk
>                                         
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
                                          
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>