Paul,
See the configuration example for WriteLog (USB) and MK2R+ available
in Router (Help | Download Documents) or on-line at
www.microHAM-USA.com/support.html.
If you're not displaying one of the frequencies on WriteLog, you
probably have a ports configuration issue in WriteLog ... IIRC it
should be possible to use the same Router configuration for both
WriteLog and Win-Test *if* you configure Writelog so it doesn't set
RTS and DTR on the CAT ports (see [RIGS] in WriteLog.ini).
73,
... Joe, W4TV
On 4/3/2012 12:02 PM, W2LE wrote:
> Setting up a new MK2R+ with Writelog 11.02B. Using an IC7800 and a K3.
>
> I have the two radio windows open and focus shifts when I click on those
> windows. But the freq displays for only one radio, the other band can
> be set if I left click on the freq window.
>
> If I only define one of the radios at a time in the ports table it
> displays its freq ok - the K3 and 7800 work if in the ports table by itself.
>
> In Win-Test there is no problem - leads me to think Router is set up
> ok. What am I missing in WL?
>
> Paul W2LE
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|