[Top] [All Lists]

[WriteLog] Problems setting up MK2R+ for RTTY

To: writelog@contesting.com
Subject: [WriteLog] Problems setting up MK2R+ for RTTY
From: W2LE <w2le@yahoo.com>
Date: Tue, 02 Oct 2012 11:31:26 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Running Writelog 11.06A, Microham router 8.1.4, MMTTY 1.68A in two different folders.
I've set up Writelog according to the Microham notes.

MMTTY running without Writelog works fine for each radio, each using Com-txd.

But running RTTYRITE/MMTTY there are problems.
The left radio (1) works correctly, but when I switch to the right radio (2) when I hit an F key to send anything the Tx port in that MMTTY switches to sound (should be Com-txd, and it was that before hitting the F key. Of course this results in a steady carrier.

To change it back to Com-txd I have to start the stand alone MMTTY for that radio and change it there.

Any ideas?

Paul  W2LE

WriteLog mailing list
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>