WriteLog
[Top] [All Lists]

Re: [WriteLog] cursor

To: "john@kk9a.com" <john@kk9a.com>
Subject: Re: [WriteLog] cursor
From: William Maurer <wb6jjj@sbcglobal.net>
Date: Mon, 10 Feb 2014 09:50:13 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
John,
After you remove the RST field as Gary suggested, you can use your mouse to 
click on the left most number in his serial number to enter it into the serial 
number field.  WriteLog knows that since it is all numbers, it goes into the 
serial number field even if your cursor is in the Call field.  For me, this 
reduces typing errors a great deal...

Bill
WB6JJJ


> On Feb 10, 2014, at 6:31 AM, john@kk9a.com wrote:
> 
> Great suggestion!  I messed up the 599 field many times last weekend and
> it is not that easy to fix in the heat of the contest.
> 
> John KK9A
> 
> 
> To:    writelog@contesting.com
> Subject:  Re: [WriteLog] cursor
> From:     "Gary AL9A" <al9a@mtaonline.net>
> Date:     Sat, 8 Feb 2014 16:02:58 -0900
> 
> 
> Yes, there is an easy way to do this. Go to Contest/Exchange Format
> Setup... In the Edit QSO Exchange Fields window that opens, in the
> Exchange Fields column, click on the RS Exchange Field. In the Setup
> attributes box uncheck the Prompt item and then click on OK. Now the Entry
> window only has the CALL and NUMB fields. If someone sends you something
> other than 599 for the RS report just enter them into the log and then
> double click on the RS column for that call and fix the report in the Edit
> window.
> 
> With the RS field not showing a Space will jump directly to the NUMB
> column. Do a File/Save and a Setup/Save Configuration to save the new
> Exchange Format setup.
> 
> 73,
> Gary AL9A
> 
> 
> -----Original Message----- From: Courtney Judd
> Sent: February 08, 2014 2:31 PM
> To: Writelog
> Subject: [WriteLog] cursor
> 
> hey guys, using WL 11.18C in WPX rtty today and just was wondering if
> there is an easy way to get the cursor to end up in NUMB column when you
> click on a call in the rttyrite window and move it to the CALL space,
> Cursor then ends up in the RST space which requires an extra click to
> get to the NUMB spot! Looked in the help files but did't see anything,
> Thanks, Cort K4WI... NA4W in this one!
> _________________________________________
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>