WriteLog
[Top] [All Lists]

Re: [WriteLog] Lost bandmap on IC-7600 with firmware update

To: <writelog@contesting.com>
Subject: Re: [WriteLog] Lost bandmap on IC-7600 with firmware update
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Fri, 12 Jun 2015 15:55:28 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Gordon,

I have also upgraded my IC-7600 to the new V2 firmware and there is no problem with the WL bandmap. There must be something amiss with a setting or screen position in WL that is preventing you from seeing the bandmap. It is not due to the firmware update in the 7600.

73,
Gary AL9A

-----Original Message----- From: Gordon Bousman
Sent: June 12, 2015 2:15 PM
To: writelog@contesting.com
Subject: [WriteLog] Lost bandmap on IC-7600 with firmware update

I updated the firmware on my IC-7600 and now no longer have a working RTTY
band-map with WriteLog.  My Pro-3 bandmap in my RTTY SO2R setup (using
microHAM MK2R+) still works fine so assume that there is not much that I
can do about the 7600 band-map issue until the WriteLog folks provide an
Icom update.  Same problem noted with a IC-7100 that I am configuring for
portable field day RTTY.  Thanks to Gary, AL9A for guidance in getting the
IC-7100 mostly working via re-doing the CI-V hex code in the WriteLog.ini
file (no selectable IC-7100 option in the most current version of
WriteLog).

73 Gordon NW7D
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>