Hopefully Joe W4TV will chime in on this one. But from what I remember, the
problem could be related to having both hardware and software PTT enabled.
Since you are using a microKeyer II, I can only guess that you should be using
hardware PTT. Disable Comm PTT in the Ports menu in WriteLog and try it again.
73, Don AA5AU
From: Torben Kahr <oz9ga@kahrius.dk>
To: writelog@contesting.com
Sent: Monday, September 21, 2015 9:37 AM
Subject: [WriteLog] Problems with transmitting RTTY
I have just bought a new laptop, so I have decided to upgrade my WriteLog to
the latest version 11.29.
Everything is installed with MMTTY and XMMT.
I use Micro Keyer II
With MTTY alone everything seems to be OK.
But with WriteLog there are problems with FSK and TTL.
TTL starts, when I start transmitting, but it stops before all the text is
sent, and on the Micro Keyer II there is light in the red LED (Line) also
while I am transmitting. It does not happen, when I use only MTTY, in this
case there is light on it only when I am receiving.
I wonder: what am I doing wrong? Where is the error?
73 de OZ9GA (5P9X)
Torben
oz9ga@kahrius.dk
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|