Ok, I was to fast in my comments about the window docking. I see now how to
keep them docked but resize them.
But my comments about scaling on the hidef display are still valid.
Thanks
Dan K0TI
On Thu, Jan 14, 2016 at 3:52 PM, Dan Karg <dkarg@ekarg.com> wrote:
> Testing V12 here on a couple of different box's. The only major thing I
> have to say is that some windows don't scale properly on a HiDef display.
>
> I have a Lenovo Yoga2Pro with a 3200 x 1800 display. Running Windows 10
>
> Two windows that don't scale properly and I don't see a way to fix.
>
> The opening window. The file names are piled up on one another. I think if
> the font was different it would be ok. I noticed a similar affect on the
> Check Call window until I changed the font.
>
> The BandMap window is really bad. The only way to see the frequency
> readout is to have the window about 1/3 of the screen wide if its vertical
> and over half the screen if it's setup horizontal.
> Some of the other windows the default font didn't display correctly either
> but I was able to change those.
>
> This all worked OK on V11 with the same computer.
>
> Other comments:
> I'm not a big fan of having to have all the separate undocked windows. But
> I guess that's the way of the future.
> It would be nice if you would resize the windows while they are docked,
> unless I don't see how looks like they are either full width or height of
> the main window unless they are undocked. The tabbed document option might
> be useful.
>
> Thanks
>
> Dan K0TI
>
>
>
>
>
>
>
>
>
> On Tue, Jan 12, 2016 at 3:00 PM, Steve Woodruff <steve@n9oh.com> wrote:
>
>> Hi Folks,
>>
>> WriteLog version 12 is finally here!
>>
>> WriteLog version 12 is a major upgrade to the premier contesting logging
>> program. It includes an upgraded appearance and superior customization,
>> a completely revamped Band Map including waterfall display for many
>> Software Defined Radios, enhanced rate graphs and packet spot support.
>>
>> Version 12 requires Windows 7 or later. Version 11 runs on Windows 2000
>> and later, and we will continue to support it with bug fix releases
>> only, and
>> for a limited time only.
>>
>> The registration codes for Version 12 are compatible with those for
>> Version
>> 11. If you have purchased WriteLog within the past 12 months, you may
>> install the latest of either Version 11 or Version 12. If you decide to
>> go
>> backwards in versions, the instructions are the same as they always have
>> been: you must use Windows Control Panel to uninstall WriteLog and then
>> install the latest full install kit that you have purchased. Finally,
>> you upgrade
>> from there to any later version you prefer.
>>
>> The WriteLog 12 upgrade process will have one additional restriction:
>> the
>> freely downloadable upgrade installers for WL12 will only be able to
>> upgrade
>> prior version 12 installations, but with one important exception. The
>> 12.01
>> upgrade installer on this page is able to upgrade version 11
>> installations
>> from registration codes purchased up to 12 months before the Version
>> 12.01
>> release date. No subsequent version 12 upgrade installers (12.02 and so
>> forth)
>> have the capability to upgrade from Version 11.
>>
>> The WriteLog 11 to 12 upgrade process requires a reboot, as does any
>> uninstall of WriteLog.
>>
>> If you're still reading... thank you! Now for the good part.
>>
>> WriteLog version 12.01 is a free upgrade for anyone who has purchased
>> the
>> full version of WriteLog after Jan 2015. This excludes the "Newbie"
>> version,
>> which does not include any free upgrades. If you are running an earlier
>> version, go here to purchase a new registration code:
>> http://writelog.com/ordering
>>
>> WriteLog 12.01 includes the following new features/fixes:
>>
>> * Toolbars with icons from icons8.com
>> * New band map display with support to overlay SDR spectra
>> * Support OmniRig as client–shares rig control with other apps
>> * Configure SDRs for band map display
>> * Replace Export with Export-Copy-As. File/Save-As
>> only creates .wl file
>> * Button to email CC of Cabrillo to scp
>> * Docking panes changed to use MFC Feature Pack.
>> * Save -DockingPanes.reg file
>> * add ADIF, LOTW, and Cabrillo export to the toolbar
>> * Disable File/Open menu entry if there are unsaved QSOs
>> in the log.
>> * The Packet spot window has option to view spots of “me”.
>> * Add fudge-factor for packet spot Follow Me that fixes that
>> setting for ARRL SS.
>> * The Rate Graph is in a dockable window and the current
>> hour updates in real time.
>> * Settings are in the registry and are to be edited only from
>> the startup screen. They can be copied to/from an INI file,
>> and imported from version 11 writelog.ini
>> * Turn off creating a networking diagnostic file
>> WlogNetDde_nn.log with [network]LogFileVersion=-1.
>> * Add options for using the preset exchange.
>>
>> For users of FlexRadio 6000 series rigs, there is a separate download
>> now
>> available on the WriteLog Downloads page that you'll be interested in
>> for
>> this release of WriteLog. It has changed for V12 releases.
>>
>> The latest software can be downloaded here:
>> http://writelog.com/downloads/writelog-versions
>>
>> Thanks,
>>
>> Steve N9OH & Wayne W5XD
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
>
>
> --
> Dan K0TI
>
--
Dan K0TI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|