Will the device manager let you change it? If not you can change the
address in Direct I/O to match. I have successfully used non standard LPT
addresses on all but one of my XP computers.
John KK9A
To: writelog@contesting.com
Subject: Re: [WriteLog] Windows XP
From: ukbrown--- via WriteLog <writelog@contesting.com>
Reply-to: "ukbrown@aol.com" <ukbrown@aol.com>
Date: Thu, 11 Feb 2016 06:53:45 -0500
Good morning
I am still running XP with Writelog 11:32 but for some reason my device
manager Resource code under LPT1 has changed.
How do I get it to reset to the Direct I/O 378 and 37F code. That are
needed.
I did find that those codes set up on my LPT3 printer port.
I am thinking this is my issue to get my cw keying and rig switching with
the
old DX Doubler Box back again.
Any help is appreciated since I am not a computer person.
Thanks as always.
K0UK
bill brown
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|