[WriteLog] IC-7300

To:	<writelog@contesting.com>
Subject:	[WriteLog] IC-7300 - SDR Setup
From:	Alessandro Salvatico <i2sva@i2sva.it>
Date:	Tue, 13 Feb 2018 20:07:03 +0100
List-post:	<mailto:writelog@contesting.com>

Hi all,

I am trying to configure the IC-7300 and Writelog in order to add spectrum and 
waterfall to the Band Map. I think that it should work (IF out of the IC-7300 
USB port -> IQ Source..), but unfortunately WL SDR Setup IQ Source lists only 
the Audio devices and not the USB/Com3 port.

Any idea or suggestion? Who can share his successful configuration?

Thanks, 73

 

Alessandro, I2SVA

 

 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread]	Current Thread	[Next in Thread>
[WriteLog] IC-7300 - SDR Setup, Alessandro Salvatico <=

Previous by Date:	[WriteLog] callsign modifiers and SCP, Jeff Stai
Next by Date:	[WriteLog] How to get correct zone being used for IARU HF or CQ WW160, Kari Gustafsson
Previous by Thread:	[WriteLog] callsign modifiers and SCP, Jeff Stai
Next by Thread:	[WriteLog] How to get correct zone being used for IARU HF or CQ WW160, Kari Gustafsson
Indexes:	[Date] [Thread] [Top] [All Lists]

[WriteLog] IC-7300 - SDR Setup