WriteLog
[Top] [All Lists]

[WriteLog] WriteLog 12.36 now available!

To: writelog@contesting.com
Subject: [WriteLog] WriteLog 12.36 now available!
From: "Steve Woodruff" <steve@n9oh.com>
Date: Sat, 12 Jan 2019 11:01:50 -0500
List-post: <mailto:writelog@contesting.com>
Hi Folks,

WriteLog version 12.36 is a free upgrade for anyone who has purchased the full 
version of WriteLog since Jan 2018.
If you are running an earlier version, go here to purchase a new registration 
code: http://writelog.com/ordering

New in version 12.36 since 12.35:

* Support Entry Windows in columns with keyboards.
* Fix an intermittent hidden-hang-at-exit of WriteL32.exe for the case there 
had been at least one control site previously connected.
* Optimize the menu checkbox display for the control site Radio menu (that was 
really slow to update.) This breaks remote/control compatibility across 
versions. 12.36+ now required on both ends.
* Fix failure to auto-resume CQ for the case of pressing an f-key on an Entry 
Window while that same Entry Window is transmitting
* Update the CW/SSB/RTTY memory edit to enforce a leading %X on all modes if on 
any.
* Update the K3 driver to support K3's new SWR serial command for display on 
RC-1101.
* Lookup friend.ini in [Configuration]Datafiles directory in preference to the 
(protected) installation
* Enable configuring and loading multiple shortcut processing assemblies.
* Shortcut processors can coordinate across control-site/remote-site. An 
example is the ASW12V antenna switch.
* Add support for the RC1101 control device for local rigs.
* MN QSO Party cabrillo update.
* Allow leading minus or plus sign in RST fields.

This release also contains the relatively new Remote Rig Control feature and 
you can read all about that here: 
https://writelog.com/announcing-writelog-remote-control

For more information, read the help file in WriteLog.

12.36 upgrade installers are available here:
http://writelog.com/downloads/writelog-versions

Updating to 12.36 does not automatically update the necessary multiplier files. 
You must also File/update-data-files in WriteLog to download them. For anyone 
choosing to run WriteLog without upgrading, you still want to 
File/update-data-files in WriteLog to get the multiplier updates.


Thanks,

Steve N9OH & Wayne W5XD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] WriteLog 12.36 now available!, Steve Woodruff <=