My original post to the reflector did not go through because I had a
screenshot embedded with the message. So here is the message without the
screenshot.
I am reporting that clicking on a spot on the bandmap (at least on CW), causes
the 7300 to QSY to the spot. It works for me.
Don AA5AU
On Sunday, July 6, 2025 at 07:39:02 AM CDT, Don AA5AU <aa5au@bellsouth.net>
wrote:
Hi Curt. I just tested clicking on a callsign on the bandmap using the CQ WW
VHF module while on 6 meters using an IC-7300 and it works fine in WriteLog
version 12.88E. What version are you using? It probably shouldn't matter. It
should be working.
My IC-7300 is on USB COM port 5 and I'm using a Mortty for CW on COM port 6.
<screenshot missing>
If you still don't have it working, the only thing I can think for you to do is
to reinstall the latest version of WL that you have. You don't have to
uninstall anything. Just re-run the installation program and restart your PC.
There have been times when the bandmap didn't work right and I've had to
reinstall WL. Usually that involves the bandmap being blank. I don't recall
having the issue you are reporting.
73, Don AA5AU
On Saturday, July 5, 2025 at 09:39:35 AM CDT, Curt Kolovson
<ckolovson@gmail.com> wrote:
Hi Guys,
I'm using an ICOM 7300. I believe I have my ports set up correctly for rig
control using CI-V on the 7300. I can type in a freq in the entry window
and it will QSY to that freq. But clicking on the bandmap has no effect.
Any idea what might be wrong? Thanks in advance.
73 OMs de Curt W6RQ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|