[Top] [All Lists]

[Yaesu] FT1000MP Band Data jack decode?

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000MP Band Data jack decode?
From: dts@senie.com (Daniel Senie)
Date: Sun, 12 Jan 1997 15:46:06 -0500 (EST)
The Band Data jack on the FT1000MP (I think the same pins are there on the
990 and other rigs) has 4 pins, labeled BAND DATA A, B, C and D. I am
curious of two things:

1. What is the signal level (or levels?) used on these pins.

2. What is the decode of the set of pins?

Clearly these pins instruct the FL7000 or other devices of the band
selection on the radio, but the manual for the radio does not indicate
what the decodes or levels are. I want to make my own device to work with
these pins, and so need full info.

Anyone know the details?


Daniel Senie                 Internet:     dan@senie.com,
Daniel Senie Consulting                    n1jeb@senie.com

FAQ on WWW:               http://www.contesting.com/yaesufaq.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 ke7gh@contesting.com
Sponsored by:             Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT1000MP Band Data jack decode?, Daniel Senie <=