[Top] [All Lists]

[Yaesu] FR100MP Processor

To: <yaesu@contesting.com>
Subject: [Yaesu] FR100MP Processor
From: Steve_Mutkin@wgs.co.uk (Steve Mutkin)
Date: Thu, 10 Apr 1997 15:06:34 +0100

Can anyone please explain to me how the processor on the 100MP works.

It appears to be completely different to that implemented on the FT990.

After following the instructions in the manual about setting up the
processor and the ALC I find that if I want to reduce the level of
compression by turning the processor control anti-clockwise the power
level is also reduced until it is zero with the processor control at

1)      How can I keep the same level of power but use a low level of 

2)      The manual says that the RF control (with the processor switched        
is used to drive the level of the ALC. 
        Why is this different to saying it alters the level of power    
output?.....Or is it different?



FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FR100MP Processor, Steve Mutkin <=