[Top] [All Lists]

[Yaesu] FT1000 MP Keyer Control

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000 MP Keyer Control
From: driller@mars.superlink.net (Steve Meltz)
Date: Tue, 22 Apr 1997 17:54:32 -0700
I would like to wire up a remote keypad to access the built-in 
keyer.  I purchased a 12 button membrane switch which uses a 3 X 4 
matrix.  I wanted a switch with 12 seperate buttons, but have been 
unable to find one.  My question is;  can I use the matrix switch by 
hooking it up to a set of AND gates to do the switching, and if so, can 
anyone supply me with a "cook book" procedure to do this (in other words 
I can wire it up, but I need a FULL schematic).

  Thanks in advance for any help   73   Steve   N2QLQ

FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT1000 MP Keyer Control, Steve Meltz <=