[Top] [All Lists]

[Yaesu] Any Alternative to FIF-232C Interface?

To: <yaesu@contesting.com>
Subject: [Yaesu] Any Alternative to FIF-232C Interface?
From: lmenzel@millcomm.com (Larry Menzel)
Date: Mon, 02 Jun 1997 06:55:52 -0600

A great little interface with the "guts" built right into the DB25
connector is made by JCOM.  They advertise in QST and other pubs...I'll
send you their address if I can find it.  You might look on the Web at
www.dxer.org and see if there's a link to JCom.

I have one I got from a friend.  I believe they cost about $50.  Much
cheaper than the  Yaesu unit and works just fine.

Larry N0XB
Northfield, MN

At 07:19 AM 6/2/97 -0400, John_Skapiak@inficon.com wrote:
>Looking for any information on any  less expensive alternatives to the
>Yaesu FIF-232C interface.  Any help would be greatly appreciated.
>John      K2SY
>FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
>Submissions:              yaesu@contesting.com
>Administrative requests:  yaesu-REQUEST@contesting.com
>Problems:                 owner-yaesu@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>