I am using both of the settings that start from 300Hz for TX EDSP and RX
EDSP. I am at work and can't remember the exact range but I like the
way it sounds on both Xmit and Rcv when the EDSP is in line.
I think it depends on how much you use the Low bands whether or not you
use a flat front end or not. I am active on 80m and 40m and find the
tuned front end is effective.
> -----Original Message-----
> From: firstname.lastname@example.org [SMTP:email@example.com]
> Sent: Thursday, July 31, 1997 12:31 PM
> To: 'yaesu@Contesting.com'
> Subject: [Yaesu] 1000MP Menu Settings
> I was wondering if you have a 1000MP, maybe you can share with me some
> of the settings that you have changed from the default.
> I am curious if you prefer a Tuned front end or flat... I think I am
> leaning towards a Tuned front end.
> Any preferences with the TX EDSP? RX EDSP settings,
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: firstname.lastname@example.org
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Administrative requests: yaesu-REQUEST@contesting.com