[Top] [All Lists]

[Yaesu] FT-1000(X) S-meter calibration

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000(X) S-meter calibration
From: k3mm@erols.com (Tyler Stewart)
Date: Sun, 9 Nov 1997 23:55:31 -0000
I dont think that is correct.  I'm pretty sure it's 50 uV...at least on the
That's what I derived from my service manual.

They say it's 100dbu for full scale which means S9 is 40 dbu which converts to
50uV.  Someone correct me if I'm wrong...

73, Ty K3MM
-----Original Message-----
From: Morel Grunberg <morel.grunberg@telrad.co.il>
To: 'Yaesu reflector' <yaesu@contesting.com>; 'FT-1000MP list'
To: <yaesu@contesting.com>
Date: Sunday, November 09, 1997 06:26
Subject: [Yaesu] FT-1000(X) S-meter calibration

>Does some one know what's the reason Yaesu
>choose to calibrate their HF rigs S-meters with
>250uV/50 Ohms for a S-9 reading ( FT-990,
>FT-1000D, FT-1000MP and FT-920 ) ?
>Morel, 4X1AD
>FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
>Submissions:              yaesu@contesting.com
>Administrative requests:  yaesu-REQUEST@contesting.com
>Problems:                 owner-yaesu@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>