[Top] [All Lists]

[Yaesu] FT1000 Locked Rx's ?

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000 Locked Rx's ?
From: robin@g3tkf.demon.co.uk (Robin Thompson)
Date: Wed, 30 Sep 1998 18:09:18 +0100
Thanks for the replies chaps ....unfortunatly the "Hold the lock button"
ONLY applies to the FT1000 MP --- NOT the FT1000 unfortunatly . BUT it
would appear that there may be a solution to the problem.
It has been suggested by Kevin Hobbs that disconnecting the pulse o/p
from the sub VFO and driving both with the main VFO o/p works ok - a
simple c/o switch achieves the desired results. I am looking into if the
Sub VFO "Lock" button can perhaps change over a small 5v relay and
achieve this ..... more later !!
In article <d23a99f9.361254df@aol.com>, DJ2001@aol.com writes
>I like that feature too but isent there a way to push and lock that function
>so that we dont have to keep holding it down?
>FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
>Submissions:              yaesu@contesting.com
>Administrative requests:  yaesu-REQUEST@contesting.com
>Problems:                 owner-yaesu@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

Robin Thompson
City of Bath

FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>