Yaesu
[Top] [All Lists]

[Yaesu] FT1000MP and DVK

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000MP and DVK
From: kq2m@mags.net (Robert L. Shohet)
Date: Wed, 28 Oct 1998 10:55:23 -0800
Robert L. Shohet wrote:
> 
> Hi guys,
> 
> I am new to the reflector and new to the FT1000MP.   Bought a used one
> S/N 5..... and used it in CQWWSS.  A great radio!
> 
> Problem....  I tried to get it to work with my DVK and could not.  I
> wired the DVK to radio connector and the DVK to MIC connector EXACTLY
> the same way as the Yaesu mic to radio connector (AD1Y for Heil BM5).  I
> wired the 5 pin din plugs AT the DVK exactly as I did for the Kenwood.
> I believe this should have worked but all I got was a hum with no audio.
> 
> To check if the DVK was working properly, I connected the "Kenwood"
> cables to my TS930 and everything worked fine with no audio hum.
> 
> Here is how I wired the 8 pin mic connectors:
> 
> White wire             - Mic.     -   pin 8
> 
> Shield & Black wires   - Mic. Gnd -   pin 7
> 
> Red wire               - PTT      -   pin 6
> 
> Clearly I did not wire something correctly and would appreciate any help
> and suggestions.  Tnx!
> 
> Bob KQ2M


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT1000MP and DVK, Robert L. Shohet <=