Yaesu
[Top] [All Lists]

[Yaesu] PSK31/FT-990AC

To: <yaesu@contesting.com>
Subject: [Yaesu] PSK31/FT-990AC
From: WmLB@prefer.net (Bill Brannick)
Date: Sat, 20 Mar 1999 14:11:14 -0800
This is a multi-part message in MIME format.

------=_NextPart_000_0005_01BE72DB.83BDA240
Content-Type: text/plain;
        charset="windows-1254"
Content-Transfer-Encoding: quoted-printable

I am  giving thought to trying out this new digital mode. In reviewing =
the documentation for the program the interconnects required between the =
rig and sound card are as follows:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Connect a screened audio cable from the audio output of your SSB =
receiver to the line input jack of your soundcard. Either left or right =
input (or both) will work. Don't use the microphone input of the =
soundcard. It's best to use a dedicated auxiliary audio output on the =
receiver which does not vary in level with speaker volume.

Connect a similar audio lead from the left or right stereo output (but =
not both) of the soundcard to the auxiliary audio input of your SSB =
transmitter. Again, it's best to use a dedicated auxiliary audio input =
(phone patch) rather than the microphone input.=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

I do not use the two jacks on the back of the 990 labeled "AF Out" and =
"Patch In"  so it would seem I could satisfy the above requirements by =
utilizing those two jacks and just making up a couple of shielded audio =
lines with phono jacks on one end (for the 990)  and 1/8" mono jacks on =
the other (for the sound card).

Is it really that simple ..or am I missing something?


------=_NextPart_000_0005_01BE72DB.83BDA240
Content-Type: text/html;
        charset="windows-1254"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Dwindows-1254" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2014.210" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#fffcf0>
<DIV><FONT size=3D2>I am&nbsp; giving thought to trying out this new =
digital mode.=20
In reviewing the documentation for the program the interconnects =
required=20
between the rig and sound card are as follows:</FONT></DIV>
<DIV><FONT=20
size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV>
<DIV><FONT size=3D2>Connect a screened audio cable from the audio output =
of your=20
SSB receiver to the line input jack of your soundcard. Either left or =
right=20
input (or both) will work. Don't use the microphone input of the =
soundcard. It's=20
best to use a dedicated auxiliary audio output on the receiver which =
does not=20
vary in level with speaker volume.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>Connect a similar audio lead from the left or right =
stereo=20
output (but not both) of the soundcard to the auxiliary audio input of =
your SSB=20
transmitter. Again, it's best to use a dedicated auxiliary audio input =
(phone=20
patch) rather than the microphone input. </FONT></DIV>
<DIV><FONT=20
size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>I do not use the two jacks on the back of the 990 =
labeled "AF=20
Out" and "Patch In"&nbsp; so it would seem I could satisfy the above=20
requirements by utilizing those two jacks and just making up a couple of =

shielded audio lines with phono jacks on one end (for the 990)  and 1/8" =
mono=20
jacks on the other (for the sound card).</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>Is it really that simple ..or am I missing=20
something?</FONT></DIV>
<DIV>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_0005_01BE72DB.83BDA240--


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>