[Top] [All Lists]

[Yaesu] Filter Question

To: <yaesu@contesting.com>
Subject: [Yaesu] Filter Question
From: kartys@ncs.gov (Karty, Steven)
Date: Tue, 25 Sep 2001 08:25:59 -0400
The FT-990 didn't appear until several years AFTER the FT-1000.  You might
be able to buy a replacement board for mounting your filter from Yaesu in
California.  There is also an after-market filter company in Florida that
might sell you the board.  

73, Steven - N5SK
-----Original Message-----
From: Barry N1EU [mailto:n1eu@hotmail.com]
Sent: Monday, September 24, 2001 9:23 PM
To: yaesu@contesting.com
Subject: Re: [Yaesu] Filter Question

Thanks much for all the info I received in response to the post.  Yes, it 
seems that Yaesu originally sold the core filter XF-110C for the FT-990 and 
then mounted it on a pc board for the FT-1000 without changing the part 

If anyone has an old ceramic filter that they pulled out of the FT-1000, I'd

be interested to use its board for mounting the XF-110C.

Barry  N1EU

>   Would appreciate help with a bit of a head scratcher.  The "XF-110C" is
>   listed as the 500hz 455Khz i.f. filter for the FT-1000.  I recently 
>   an XF-110C, but found that it has quite a different pin configuration (4
>   male pins) than the FT-1000 uses (8 female).  Does anyone know if Yaesu
>   changed the pin configuration at some point without changing the part 
>   Tnx/73,
>   Barry  N1EU

<Prev in Thread] Current Thread [Next in Thread>