[Top] [All Lists]

[Yaesu] FT-100 with the VL-1000

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-100 with the VL-1000
From: dave@n8it.org (David Wright)
Date: Fri, 12 Apr 2002 21:05:00 -0400 (EDT)
Yes, you need to unplug the cable from one socket and plug it into another 

Dave - N8IT

On Fri, 12 Apr 2002, W.P.Van Horn wrote:

> I want to use my FT-100D with my VL-1000 amp.There is an instruction on page 
> 19 of the FT-100D Operating Manual that says "When operating the FT-100D with 
> the VL-1000 Solid State 1 KW Linear Amplifier, change the internal 
> connections of the FT-100D as shown below." There is a sketch of the bottom 
> side of the FT-100D showing a cable with two plugs and three sockets with an 
> arrow going form one socket to another. I don't understand that instruction. 
> Must I remove the bottom cover of the FT-100D to see the area referred to in 
> the sketch?

<Prev in Thread] Current Thread [Next in Thread>