Wow .... I found the problem with the DVS-2 audio.
I had a loose ground connection for the trx. :-() Wow,
didn't guess how much grounding matters. :-))
So headsup guys - everytime you see a great pice of
equipment do strange things - check the grounding ...
----- Original Message -----
From: "Helmut (DF7ZS)" <email@example.com>
To: "Helmut (DF7ZS)" <firstname.lastname@example.org>; <Yaesu@contesting.com>
Sent: Monday, November 18, 2002 9:11 PM
Subject: Re: [Yaesu] DVS-2 bad audio in monitor not on the band ?
> Realy nobody a chance to verify this ?
> ----- Original Message -----
> From: "Helmut (DF7ZS)" <email@example.com>
> To: <Yaesu@contesting.com>
> Sent: Friday, November 15, 2002 1:27 PM
> Subject: [Yaesu] DVS-2 bad audio in monitor not on the band ?
> Hi there.
> I just installed my brand new FT-1000 MP Mark-V. The first impression
> is great. I connected all my accesories from the "old" MP but the DVS-2
> seems to act different.
> Ususllay at the MP - I have the monitor switch on so I can hear my own
> audio comming out of the DVS-2 with very low volume. On the Mark-V
> the audio comming from the DVS-2 sounds distorted - like very much
> HF interfeering with it. I quickliy pluged in the old MP to listen to my
> signal and it is 100% fine ! It seems to effect "just" the monitor audio
> Secound guess was HF feedback - I reduced the output to minimum, but
> the efect is still there ...
> Can someone verify this with his equipment to find out if this is standard
> Not using the monitor switch plays back the DVS-2 audio very loud ! Is
> a way
> to adjust this ?
> --- StripMime Report -- processed MIME parts ---
> text/plain (text body -- kept)
> Yaesu mailing list