>
> Hi all ,
> I inherited a FRDX400 with problems(recieve dead)someone has
> already been at it. I found the cap inside L115 burnt out .I replaced
> this with 100pf, I believe this is the correct value. I can peak the
> calibrate signal also can hear signals at a very low level on aan
> antenna but no background noise out of the receiver with the gains fully
> up.The audio stage is working ok!Any ideas or suggestions would be
> welcome. I would like to get it up and running as I had one of these
> during the early 70's also this one is very clean. Is there anyone out
> there in the UK with a non-working or scrap one they want to part with.
> I would also like to get hold of a FLDX400 to go with it just for
> old times sake.
> Many thanks es 73 Roy G3ZIG
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|