[Top] [All Lists]

[Yaesu] 50W switch

To: yaesu@contesting.com
Subject: [Yaesu] 50W switch
From: certified-electronics@juno.com
Date: Sat, 24 Jan 2004 02:12:54 +0000
List-post: <mailto:yaesu@contesting.com>
I could be wrong here, but I'm going to take a stab at that switch. I
think it
possibly limits the 10 meter output to 50 watts.  I bought an FT-101S in
many years ago and their limit was 50w for ten meters.  Just guessing but
check the power output on 10 meters after you flip that switch around.
Only a guess !
Carol Maher
Charlotte N.C.

> Last night I helped a friend fit a couple of Inrad filters to his 
> FT-1000D.
> Looking on the lower main board, I noticed a switch marked 'S3001' 
> that has
> '50W' against one position and nothing against the other. The switch 
> was set
> to the unmarked position. It doesn't seem to be mentioned in the 
> owners'
> manual - anyone know what it does?
> I also noticed that the owner was switching his Alpha amp via the 
> 'Tx GND'
> socket and associated relay. I'd have thought it should be possible 
> to use
> pins 2 and 3 on the BAND DATA output to achieve the same end -- is 
> this
> correct?
> Finally, I've heard various things about the quality of the tuning 
> upgrader
> sold by International Radio. Any opinions one way or the other?
> 73 John

The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] 50W switch, certified-electronics <=