[Top] [All Lists]

[Yaesu] Ft8500

To: yaesu@contesting.com
Subject: [Yaesu] Ft8500
From: Eberle123@aol.com
Date: Fri, 30 Jan 2004 09:27:30 EST
List-post: <mailto:yaesu@contesting.com>
OK here is the problem.  I keep dropping out of one of the local repeaters 
where I live. This happens with my mobile radio only.  No one else has a 
getting into this repeater.  The problem is with the PL encode on the radio.  
The repeater does not loose my signal, it just stops decoding the pl.  I had 
my friend watch the repeater panel, the cor light stays on, but the decode 
light goes out.  The weird part is I don't have a problem with any other 
repeaters.  I ran the power wires direct to the battery and the partially cured 
problem but it is still there.  The radio is installed in a 98 Dodge 2500, 
diesel.  The repeater is on 450.250 with a 67.0 Pl.

Is there an adjustment for the PL output of the radio, and how do you go 
about measuring the PL output of the radio?

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>