Paul (and others who replied),\
Yes the setting of menu item 7-8 was OFF vice the correct default ON. I did
not associate "DISABLE VFO" with the problem when I first read the menu
list.
Problem cured. Thanks to all. Great radio, worked 2 new ones this weekend
in the WPX. 44 more to have them all from KH6.
73
John K1ER
----- Original Message -----
From: "Paul Carr" <paulcarr@barrow.com>
To: "John Peters" <petersj007@hawaii.rr.com>
Cc: <yaesu@contesting.com>
Sent: Sunday, March 28, 2004 10:17 AM
Subject: Re: [Yaesu] DUAL in FT1000MP MK V
> John:
>
> When I press dual, both the main and sub rx vfo's are active.
>
> What is your memu item 7-8 set for? I think for it to operate in the
> manner you wish, 7-8 should be set to on.
>
> Paul
> WL7PC
>
> John Peters wrote:
>
> >Does someone have the MFR Menu codes? The DUAL button is set to only
turn the SUB REC VFO on while the DUAL button is pressed. When DUAL is
released the MAIN REC VFO comes back on and the SUB REC VFO off. To find the
offset station working SPLIT requires holding DUAL pressed to listen for the
station working now, when DUAL released the MAIN REC VFO comes back on.
> >
> >I prefer the usual setting, DUAL turns on both REC VFO, but I think it is
a MFR software setting not in the manual.
> >
> >SPLIT (XMIT VFO) works as expected. Only the setting for the REC VFOs is
strange. It is not possible to turn both REC VFO on at the same time.
Pressing the SUB REC VFO LED switch turns off the MAIN REC VFO while the SUB
REC VFO is on.
> >
> >73 John K1ER
> >_______________________________________________
> >Yaesu mailing list
> >Yaesu@contesting.com
> >http://lists.contesting.com/mailman/listinfo/yaesu
> >
> >
> >
> >
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|