Hi Jim:
I don't have a problem with VRF or IBDT on mine, but I remember putting in
the key click and roofing filter mods. Putting everything back without
dropping one of those deep screws and not pinching one of those small wires
next to the blower was a major PITA !
I would just retrace your steps and be sure of any solder problem, etc. This
may be an academic question, but were the buttons working before the mod ?
73, Jamie
WB4YDL
-----Original Message-----
From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] On
Behalf Of Jim Mornar
Sent: Friday, May 27, 2005 11:01 PM
To: yaesu@contesting.com
Subject: [Yaesu] problem with idbt and vrf on mk5
Hello list,
I just bought a refurbed FT-1000 MK 5 at Dayton from a reputable dealer,
brought it home and installed the filters from my older MK 5 field, and the
new roofing filter mod from INRAD. I don't know if they worked before, but
the vrf and idbt buttons do nothing, and I know they are band sensitive. I
wonder if there is a menu item I have overlooked, or does the roofing filter
negate these two features? Or maybe there is a cable that came loose for
those two buttons on the dial? I thought I'd poll the list before restoring
all to original configuration. Any ideas?
Thanks to all for reading and responding!
Jim N9TK
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|