[Top] [All Lists]

Re: [Yaesu] [Elecraft] Elecraft K2 and Heil ProSet

To: w3fpr@arrl.net
Subject: Re: [Yaesu] [Elecraft] Elecraft K2 and Heil ProSet
From: ARS NZ3O <nz3o@arrl.net>
Reply-to: nz3o@arrl.net
Date: Sun, 23 Apr 2006 21:14:26 -0400
List-post: <mailto:yaesu@contesting.com>

Your comment reflects where I think I am at the moment - I would like to 
use various headsets with the K2 without having to change the K2 to be 
any other radio or radios than a K2.  Although Elecraft shows a 
ProSet-K2 on their website, I can't find an adapter-only part anywhere.

73, Byron

Don Wilhelm wrote:

>If this is the main mic that you will use with the K2, then you can wire the
>K2 mic configuration header for the Yaesu pinout, and then use whatever
>adapter you use with the Yaesu on the K2.
>OTOH, if you use a variety of mics with the K2, I recommend that you wire
>the mic configuration header for the Elecraft pinout and make/buy an adapter
>for any other mic that you will use.  I see nothing wrong with changing the
>pinout at the mic plug rather than dealing with the complication of changing
>the wiring in the K2 just to accomodate a variety of mics.  Of course, if
>you must use a mic for the K2 as well as with another transceiver, just wire
>the K2 to match whatever other transceiver the mic comes from.  The
>instructions for wiring the mic configuration header to mathc a variety of
>mics is in the KSB2 manual.
>Don W3FPR
>>-----Original Message-----
>>I have a Heil ProSet that I use with my Yaesu FT1000MP.
>>Does anyone know the part number for the K2 adapter so I can use the
>>Heil with the K2?
Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Yaesu] [Elecraft] Elecraft K2 and Heil ProSet, ARS NZ3O <=