[Top] [All Lists]

[Yaesu] 1000D main tuning knob

To: yaesu@contesting.com
Subject: [Yaesu] 1000D main tuning knob
From: <dgmaley@inav.net>
Date: Mon, 06 Nov 2006 19:16:23 +0000
List-post: <mailto:yaesu@contesting.com>
It's the bearing on the main tuning encoder.  You may be
able to work a light oil down the shaft to free it, but
most likely, the problem will come back down the road.
There's also a drag clutch on the shaft, behind the knob.
See if it frees up if you remove the clutch parts.  I do 
that the clutch spring, and the little nylon washers are 
available.  Let us know how you do.

On Mon, 06 Nov 2006 12:00:20 -0500
  yaesu-request@contesting.com wrote:
>Send Yaesu mailing list submissions to
>       yaesu@contesting.com
>To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.contesting.com/mailman/listinfo/yaesu
>or, via email, send a message with subject or body 'help' 
>       yaesu-request@contesting.com
>You can reach the person managing the list at
>       yaesu-owner@contesting.com
>When replying, please edit your Subject line so it is 
>more specific
>than "Re: Contents of Yaesu digest..."
>Today's Topics:
>   1. 1000D main tuning knob (Rick Dougherty)
>Message: 1
>Date: Mon, 6 Nov 2006 05:39:24 -0500
>From: "Rick Dougherty" <nq4i@contesting.com>
>Subject: [Yaesu] 1000D main tuning knob
>To: "yaesu reflector" <yaesu@contesting.com>
>Message-ID: <000c01c7018f$d40077a0$6501a8c0@cel600>
>Content-Type: text/plain;      charset="iso-8859-1"
>Hi All...my tuning knob on my 1000d on the 80m run 
>station got more and more difficult to turn the past two 
>days...and not it will not turn at all...any 
>de Rick nq4i
>Yaesu mailing list
>End of Yaesu Digest, Vol 47, Issue 4

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] 1000D main tuning knob, dgmaley <=