[Top] [All Lists]

[Yaesu] FT100D and UHF self osciallation

To: <FT100@yahoogroups.com>, <Yaesu@contesting.com>,<yaesu@mailman.qth.net>
Subject: [Yaesu] FT100D and UHF self osciallation
From: "John Geiger" <aa5jg@lcisp.com>
Date: Fri, 24 Aug 2007 03:56:29 -0000
List-post: <mailto:yaesu@contesting.com>
I have a Yaesu FT100D which I bought used recently, in the 2K serial number
range.  It has the factory grounding-HI SWR mod done to it, and works fine
on 10 and 12m as a result.  However, it has recently started to show a
problem with self oscillation on 70cm.  It will show a HI SWR reading on SSB
and CW, but not on FM or AM for UHF.  This probably started about 3 weeks
after getting it in.  I opened up the case and tightened all of the circuit
board screws, and that helped for a couple of days.  This past week the HI
SWR reading wasn't occurring much until today, when it is now occurring all
of the time.

I have looked at the previous messages on this topic from the ft100
reflector, but am still a little confused on how to fix this.  As I stated,
the grounding mod was done at the factory, so that shouldn't be a problem.
Any other ideas as to how to fix this?  I bought it from Burghardt's about
30 days ago and it has 60 days left on the warranty so hopefully they can
either fix it (if I can't do it myself) or exchange it.  Just looking for
ideas as to where to start on this job myself.

73s John AA5JG
(ex: W5TD, NE0P)
6M WAS #1275, 6m VUCC #1260
2m VUCC #615, Satellite VUCC #129

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>