* Dave Maley <email@example.com> [2007 Oct 30 15:17 -0500]:
> The only place that I know of that still carries these modules is RF
> parts. The listed replacement is a SAV24. They go for around $70-$80.
> Many use a SAV17 as a replacement, with slightly reduced output. The cost
> is around $50. The reason these fail is because yaesu never mounted them
> correctly and because the heat sink gets too hot before the fan comes on.
> RF parts says to check the pin diode before replacing the module. If it's
> bad too, it will take out the new module.
One thing I have done to my '5100s but not to my '5200 as of yet, is to
connect 12V through a low value resistor at the pad where the fan's
positive lead connects to keep the fan running slowly, but running all
the time. It probably also helps that I don't get a chance to ragchew
as much as I used to so the finals last longer. ;-)
73, de Nate >>
Wireless | Amateur Radio Station N0NB | Successfully Microsoft
Amateur radio exams; ham radio; Linux info @ | free since January 1998.
http://www.qsl.net/n0nb/ | "Debian, the choice of
My Kawasaki KZ-650 SR @ | a GNU generation!"
http://www.networksplus.net/n0nb/ | http://www.debian.org
Yaesu mailing list