[Top] [All Lists]

[Yaesu] ft757GX frequency display

To: yaesu@contesting.com
Subject: [Yaesu] ft757GX frequency display
From: <kc8byf@woh.rr.com>
Date: Sun, 14 Sep 2008 13:49:46 -0400
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
...FT-757GX that has a slight problem.  The frequency display is a little bit 
out of calibration.  It is off by the same amount in the given direction no 
matter what frequency, band or mode.  For example if talking on  28.427.0 USB 
the digital display reads 28.426.8... As well if I were to go to 3.950.0 LSB 
the digital display reads the same percentage off the actual frequency.  The 
same is observed in CW mode as well. The amount of discrepancy is the same 
percentage in all modes though the "direction" of the error is either + or - 
depending on mode. (normal)

The service manual (Technical Supplement) does provide information on aligning 
the local unit.  After the alignment to the components, per spec, the 
discrepancy still remains in the digital display. 

...Are there things we are missing?

...Is there an "alignment" for the digital display that is either being 
overlooked or perhaps that is not in the Tech Supp?

...Any help would be much appreciated.

Thank You

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] ft757GX frequency display, kc8byf <=