[Top] [All Lists]

Re: [Yaesu] FT 920 AFSK problem

To: rsauvan <rsauvan@beyondbb.com>
Subject: Re: [Yaesu] FT 920 AFSK problem
From: Mike <nf4l@nf4l.com>
Date: Tue, 07 Oct 2008 08:16:02 -0400
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
rsauvan wrote:
> Hi all,
> I have been battling this for a couple of days now. I have had my FT920 
> working just fine with AFSK for a couple of years. I decided to try to get it 
> to work on FSK. I soldered up a cable with the correct resistor and 
> transistor and hooked it all up.I used a spare data plug. I couldnt get it to 
> diddle with the new FSK setup. Im thinking my radio isnt seeing the 
> Byterunner add on serial com port. Ok, thats fine, Ive had that problem 
> before. I decided to put it back together with my AFSK setup which is only a 
> couple of cables to the soundcard and I didnt change any of the wiring to the 
> original data plug cable for AFSK. I have set and reset the menu items that I 
> believe are correct, but,,, when I am in USB data on the radio as I am 
> supposed to be, I hear a faint diddle, (it used to be quite loud and able to 
> control the volume) but I dont show any power output either. If I switch to 
> LSB which Im not supposed to be in, it shows power output, but I cant get the 
> "moni" to show on
>  he display and therefore not hearing anything either. I am sure I have a 
> setting wrong somewhere but must be missing something. I am using MTTY and 
> Writelog for software. Any ideas??
> Thanks-Bob-WT9Q
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
I'd look first at the settings in MTTY. Option|Soundcard levels. The 
Option|Setup MTTY. On the TX tab, make sure you have the correct COM 
port. On the Misc tab, is Sound Card ticked?
Mike NF4L

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>