Thank you for the reponse which did the trick once I pulled the band data
----- Original Message -----
From: "William Liporace - WC2L" <firstname.lastname@example.org>
To: "'Dr. Michael Hunter'" <email@example.com>
Sent: Friday, October 10, 2008 9:13 PM
Subject: RE: [Yaesu] FT 1000D and no RF
> Did you unplug the band data plug from the radio? I think that will cause
> the same issue.
> Will WC2L
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:email@example.com]
> Behalf Of Dr. Michael Hunter
> Sent: Friday, October 10, 2008 7:15 PM
> To: firstname.lastname@example.org
> Subject: [Yaesu] FT 1000D and no RF
> Just shipped my FL 7000 off today to repair so tried to fire up the 1000D
> and find I have no RF output. The antenna receive is working fine but when
> hit the key, the needle deflects backward. Not any better on a dummy load.
> Retuned CW with no luck and the automatic tuner will not help. Can't
> that disconnecting the amp would cause this so must be missing something I
> am missing
> Any suggestions before I panic ?
> Yaesu mailing list
Yaesu mailing list