[Top] [All Lists]

[Yaesu] Yaesu Dual Band HT plus HT accessories FS

To: Yaesu at contesting <yaesu@contesting.com>
Subject: [Yaesu] Yaesu Dual Band HT plus HT accessories FS
From: "Ken Simpson, W8EK" <W8EK@flham.net>
Date: Tue, 12 Apr 2011 17:42:11 -0400
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
Yaesu Dual Band HT, plus many Yaesu HT Accessories For Sale:

Yaesu VX-3 dual band HT:

The compact VX-3R 2m/70cm FM HT Transceiver is loaded with
convenience features. In additon to top quality performance
on 2m and 70cm, you will also be able to enjoy stereo FM and
AM broadcast band reception.

The Yaesu VX-3R 2 meter/440 MHz handheld has extensive receive
frequency coverage, providing local-area two-way amateur
communications along with unmatched monitoring capability.
The VX-3R receives: 500 - 1800 kHz (AM Band), 1.8 - 30 MHz
(Shortwave), 30 - 76 MHz (VHF Lowband with 6M), 76 - 108 MHz
(FM band), 108 - 137 MHz (Air Band), 137 - 174 MHz (VHF High
band with 2M), 174 - 222 MHz, 222 - 420 MHz (VHF band with 220),
420 - 470 MHz (440), 470 - 800 MHz and 800 - 999 MHz (800 band
[cellular blocked]). You get a huge 1000 channel memory system.

Power output with the supplied Lithium Ion battery is 1.5 watts
VHF and 1 watt UHF. With the optional E-DC-21 DC adapter output
jumps to 3 watts and 2 watts!

This particular HT is like new. It works 100%, and looks like
new, with no scratches. It has its original box, rubber duck
antenna, LiIon Battery, charger, and paper work all for only $155.

Yaesu HT Accessories For Sale:

FNB-82 LI Lithium Battery
Real Yaesu Battery pack for Yaesu VX-2 or VX-3 HT
The FNB-82 LI Lithium Ion Battery Pack fits both the VX-2 and the
VX-3. 3.7 volts, 1000 mahr, works great, and holds a charge
like new. $22

Belt Clip for Yaesu FT-207, with hardware. $8

Wrist Strap for Yaesu FT-209, and probably others $4

Rubber Duck antennas for your HT:

All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

BNC - About 7 inches long
BNC - Original from Kenwood TH-215, about 5 inches long
BNC - Stubby about 4.5 inches long

5/16 inch threaded, as used by Motorola and others
Stubby - 4 inches long

Type F connector - 6.5 inches long

PL-259 connector - 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby - 4.6 inches long
Centurion, still in original package

Special for Kenwood TH-21 HT threaded connector
Stubby, about 4.5 inches long - $20

BNC Stubby for 440 MHz, 3 inches long

Full size SMA for 2 meters and 440 MHz
This is a very flexible antenna that is a full quarter wave
on both 2 meters and 440 MHz. $20

Coax connectors and adapters:

Prices are per connector. Several of each are available.
These are NOS (have not been used).

"N" Connector - Double Male - $8

BNC male for coax cable
standard type - $2
crimp on type - $3

Chassis mount BNC female
square mount (uses 4 screws) - $3
screw in type - $3

BNC "T" - two female and one male - $3

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection - $5

Prices do not include shipping from Florida.



Ken, W8EK

Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] Yaesu Dual Band HT plus HT accessories FS, Ken Simpson, W8EK <=