Yaesu
[Top] [All Lists]

Re: [Yaesu] FT1000MP and RTTY

To: "'Ted Boerkamp'" <tboerkamp@cogeco.ca>, "'Yaesu reflector'" <yaesu@contesting.com>
Subject: Re: [Yaesu] FT1000MP and RTTY
From: "James C. Hall, MD" <nwtcc@earthlink.net>
Date: Sun, 17 Apr 2011 12:30:02 -0500
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
Ted:

I have the Mark V and yes, there is a control setting for RTTY frequency
display. This would be memory setting 6-3 with the possible selection being
offset or carrier. Mine is set to offset and this works fine for me.

73, Jamie
WB4YDL

-----Original Message-----
From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] On
Behalf Of Ted Boerkamp
Sent: Sunday, April 17, 2011 12:18 PM
To: Yaesu reflector
Subject: [Yaesu] FT1000MP and RTTY

Hello all

            I have some questions regarding the MP(original) and RTTY. I was
not sure whether to post it on this

reflector or the Logger32 reflector. I noticed that when I am casually
operating and I see click on a spot

for  a RTTY station from the DX spots window of Logger32,  the radio is not
displaying the same frequency

as the one posted. (rig control is being used) I realize that most hams post
the MARK freq of a station and that

what my radio is doing is displaying the SUPPRESSED CARRIER FREQ.

What I notice however is that I have to tune the radio back to the MARK
frequency to actually copy the station

properly.  Is there a setting in the MP to have the radio go to the MARK
frequency like the spot shows, or is this the 

norm for all MP owners?? 

 

example:   YB1AR spotted this morning

 

Telnet shows: 14.082.5 Mhz

after clicking on spot

Radio shows 14.084.62

Bottom of MMTTY window shows 14.082.495

 

I was able to copy YB1AR by tuning back so MP displayed 14.082.64

 

Why when I click on a spot do I still have to "tweak" the MP to properly
copy the station??

or is there a setting in the MP or Logger32 that would adjust for this?

I was able to work YB1AR and Logger32 saved 14.082.64 in the log.

 

Any help is appreciated.

Thanks

 

Ted VE3SS

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>