[Top] [All Lists]

Re: [Yaesu] FT1000MP and RTTY

To: "'Ted Boerkamp'" <tboerkamp@cogeco.ca>, "'Yaesu reflector'" <yaesu@contesting.com>
Subject: Re: [Yaesu] FT1000MP and RTTY
From: "James C. Hall, MD" <nwtcc@earthlink.net>
Date: Sun, 17 Apr 2011 12:30:02 -0500
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>

I have the Mark V and yes, there is a control setting for RTTY frequency
display. This would be memory setting 6-3 with the possible selection being
offset or carrier. Mine is set to offset and this works fine for me.

73, Jamie

-----Original Message-----
From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] On
Behalf Of Ted Boerkamp
Sent: Sunday, April 17, 2011 12:18 PM
To: Yaesu reflector
Subject: [Yaesu] FT1000MP and RTTY

Hello all

            I have some questions regarding the MP(original) and RTTY. I was
not sure whether to post it on this

reflector or the Logger32 reflector. I noticed that when I am casually
operating and I see click on a spot

for  a RTTY station from the DX spots window of Logger32,  the radio is not
displaying the same frequency

as the one posted. (rig control is being used) I realize that most hams post
the MARK freq of a station and that

what my radio is doing is displaying the SUPPRESSED CARRIER FREQ.

What I notice however is that I have to tune the radio back to the MARK
frequency to actually copy the station

properly.  Is there a setting in the MP to have the radio go to the MARK
frequency like the spot shows, or is this the 

norm for all MP owners?? 


example:   YB1AR spotted this morning


Telnet shows: 14.082.5 Mhz

after clicking on spot

Radio shows 14.084.62

Bottom of MMTTY window shows 14.082.495


I was able to copy YB1AR by tuning back so MP displayed 14.082.64


Why when I click on a spot do I still have to "tweak" the MP to properly
copy the station??

or is there a setting in the MP or Logger32 that would adjust for this?

I was able to work YB1AR and Logger32 saved 14.082.64 in the log.


Any help is appreciated.




Yaesu mailing list

This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>