Ted, I'm not sure about the MP version of the 1000. Most of us non-MP
version ops are feeding the transmit signal into the MIC jack and using
USB mode.
Someone did post http://www.tigertronics.com/ft1000mp.htm to the FT-1000
Yahoo group, you might look at that.
Dale KB5IY
On 9/9/2018 9:18 AM, Ted Boerkamp wrote:
Hello...can anyone help me with the cabling requirements to get my FT1000MP
to transmit
In FT8 mode?? I am also wondering if it might be similar to the PSK31
cabling using the Packet jack
on the back?? I have a cable connected to transmit PSK31 already and it
works.
Do I need to set up another USER set of parameters for proper transmission
on USB??
I currently can receive FT8 no problem using WSJT but when I try to connect
to someone
the PTT is activated but no power out.
Any help or instructions would be appreciated. I have looked all over the
net for such info but not
finding very much specific to the FT1000MP original.
Thanks
Ted VE3SS
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|