[Top] [All Lists]

[Yaesu] Yaesu FT-857D plus many accessories FS

To: Yaesu at contesting <yaesu@contesting.com>
Subject: [Yaesu] Yaesu FT-857D plus many accessories FS
From: "Ken, W8EK" <kenw8ek@gmail.com>
Date: Sun, 22 Aug 2021 11:43:45 -0400
List-post: <mailto:yaesu@contesting.com>

Yaesu FT-857 D and many accessories For Sale:

Yaesu FT-857D Transceiver:

The Yaesu FT-857D is the worlds's smallest
HF/VHF/UHF multimode amateur transceiver.
It is loaded with features, providing coverage
of the 160 to 6 meter bands plus the 144
MHz and 430 MHz bands!

Receive coverage is 0.1-56, 76-108, 118-164
and 420-470 MHz. The front panel is removable
and is remotable with the optional separation kit.

160-2 meters +440
Electronic Keyer
200 Alpha Memories
DSP-2 Board Built-in
100 Watts HF Output
50 Watts 2 Meter Output
20 Watts 440 MHz Output
Spectrum Display
32 color display
Beacon mode

This one includes power cord, hand mic, and
the TCXO-9. The TXCO gives 0.5 ppm stability,
which really helps with digital. This one is
a real Yaesu and not one of the Chinese
knock offs that has excessive phase noise.

Cosmetically this rig is close to perfect.
No scratches.
Electrically, it works as it should.

With paper work for only $650.


YK-857 Separation kit
This separation kit consist of three long
cables, plus a mounting bracket for the head,
along with some miscellaneous hardware.
It is complete, and appears to be unused. $50


MMB-82 mobile bracket
The Yaesu MMB-82 Mounting Bracket fits various
Yaesu products including the FT-857, FT-857D,
FT-891 and the FC-50 External Antenna Tuner, and
probably others. Any equipment that is 6.1
inches wide.
This one looks great, and includes hardware
to mount to the radio and to the vehicle.
It appears to be unused. $12


Collins Mechanical Filters for Yaesu:

Both of these Collins Mechanical filters
also have Yaesu numbers and were designed
to be used in Yaesu Transceivers. Please
check you manual to see if they fit your rig.
Both are designed for the 455 KHz IF.
If your Yaesu rig uses 455 KHz filters,
these probably fit.

Most of you may know that Collins no longer
makes mechanical filters.

Both of these work as they should, and look like new.

Yaesu XF-119 SN
Collins 526-8739-010
2300 Hz, designed for narrow SSB

Yaesu XF-115 CN
Collins 526-8733-020
300 Hz for narrow CW or digital

Note these are also known as XF-122.

Buy both of the above for $250.


LDG YT-100 Automatic Antenna Tuner:

The LDG YT-100 auto tuner fills a need for
Yaesu transceiver owners. An included CAT cable
interfaces with your FT857, FT897 and FT-100
(including all D models). This makes it an
integrated tuner powered by the interface.
No extra power cables are needed.

Just press the tune button on the tuner and
everything else happens automatically!
The mode is set to carrier and the RF power is
reduced, a tune cycle runs and then the radio
is returned to the original settings.
It operates from 160 to 6 meters with from
1 to 100 watts.

Continuous coverage 1.8 to 54 MHz
RF Power: 1 to 100 watts SSB, CW and digital modes
Tunes 4 to 800 ohms. (16 to 150 on 6 meters)
2000 memories sorted by frequency.
7.0”L, 7.0”W, 1.5”H
Weight 20 ounces

Cosmetically, this one looks like new.
Electrically, everything works as it should.
With paperwork for only $125.


LDG FT Meter for Yaesu FT-857 or FT-897:

Stop squinting! Add a real meter to your mini-Yaesu.

The LDG FT-Meter is a plug and play solution
for Yaesu FT-857D and FT-897D transceivers.
It features a 2.5 inch meter with calibrated
scales for signal strength and discriminator
reading on receive; power output, SWR,
modulation, ALC action, and supply voltage
on transmit.

Each function is selectable from the radio's menu.
These meters are easily visible and are illuminated
by an external 12V DC source.

Receive: S-Meter, discriminator, or voltage
Transmit: RF power, SWR, modulation, ALC, or voltage
Cable length 3 ft.
Sensitive 500 uA meter movement
Cool blue backlighting
On/off switch for backlight
Backlighting requires 11 to 15 V, 100 mA
For use with Yaesu's FT-857(D) and FT-897(D)
transceivers only

This one looks like new, and works like new.
With paper work for only $40'


Yaesu FP-707, 20 Amp Power Supply:

The Yaesu FP-707 power supply is designed
to match the FT-707 transceiver, but will also
match the FT-747 and 757 series transceivers,
or any HF transceiver that uses a 4 pin Cinch-
Jones connector.

Although it has the 4 pin connector, it also
has a set of binding posts on the back, so
it can be used with any rig requiring up to
20 amps.

This is a linear power supply, so no switching

It also has a built in speaker.

This one works great. It looks really
terrific, especially considering its age.

With paper work for only $100.


Yaesu Hand Microphones:

Yaesu MH-48 DTMF Hand Microphone
For Yaesu FT-7800R/7900R/1807M/1802M/1900
Has 16 digit DTMF TouchTone pad, plus 4 extra
programmable buttons, plus Up/Down and PTT.
Also had backlight with switch.
Modular connector.
Real Yaesu and not Chinese clone.
It works fine and appears to be unused. $40

Yaesu MH-67 A8J
Standard hand held microphone, with a modular
connector on it.
It works fine and looks great. $30


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.



Ken, W8EK

Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400


Yaesu mailing list
<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] Yaesu FT-857D plus many accessories FS, Ken, W8EK <=