CQ 160-Meter Contest, CW
Call: OM7RU
Operator(s): OM7RU
Station: OM7RU
Class: Single Op HP
QTH: Dolna Micina
Operating Time (hrs): 29:48
Summary:
Total: QSOs = 1101 State/Prov = 22 Countries = 70 Total Score = 539,856
Club: OM0M Dozen Dashes Contest Club
Comments:
This year 160m contest I should compare with Apollo 13. Problem after problem,
one improvisation after another. Just one mysterious Mr. Murphy masterpiece
show...
I erected pole supported K9AY RX loops again to have at least any RX antenna.
I'm using Microham Station Master as primary switching box for all antenna
switches, including K9AY box. It allows to use one equipment to maintain all my
antenna switching with high user comfort, including hot switch protections, or
precise relay switching timing. I decided to use new software - DXLog, due to
some more or less serious problems with WinTest. I studied and setup new SW few
days before the contestto not be surprised with something serious during the
contest.
Phase 1 - 21:55 UTC:
There was just 5 minutes to go, when I make last PA tune, which stopped after
few seconds with high SWR alarm. All protections works, but something else was
the primary reason. After few minutes was clear, that:
- PA off due to high SWR,
- base TCVR with high SWR,
- Station Master in the dark,
- band quiet, antennas missing.
I had to find any real reason, possible solutions, more or less complicated way
to be in the air and back in the contest. Started to reconnect whole setup to
Micro Keyer only, reconnections of coaxial feeders, temporary control lines and
connectors reconnections... OK, I had vertical connected, K9AY so-so usable, MK
reconnected, all softwares reconfigured.
Phase 2 - 23:00 UTC:
OK, let's go, lost just 1 hour. TCVR doesn't send any output power. I made a lot
of attempts to solve it, including base configuration - TCVR + footswitch +
manual key, no success. I thought about reconnecting all cabling to spare TCVR
IC-706, but last attempts worked - few minutes "all OFF from the 240
V" and it started to run correctly.
Phase 3 - 23:22 UTC:
Antennas connected, TCVR + PA are OK. Starting CQ, making first QSO. Pileup had
started. But another surprise: DXLog doesn't log QSO after pressing ENTER... I
tried to do all those things - restarts, finding those magic checkbox in bad
state, studying documentation, discussion groups... I solve it my own way by
making very strange combinations of macro commands into CW messages...
Phase 4 - 23:55 UTC:
Contest (fortunately) started. After almost 2 high stressed hours... Adrenaline
instead of coffein, hi.
First night of quite good conditions, with high nuber of NA stations and its S/P
mults. Second night without JA or interesting east mults. I completely missed
Caribean mults this year. Also CONDX was much worsen compared to first night,
only few NA stations. Nice east mults I made on Sunday evening (7Z, JT, VU), but
not JA. Fortunately, I hadn't spend a lot of time in furious and neverending EU
pileups.
I tried to start and hold my frequency inside JA window and use second RX to S/P
over the band. But it realy was hard work due to intruders. One of them was
realy deaf - nothing special, but this one was one the well known EU HAM
celebrity. No way to ask for QSY. Is well known callsign realy wildcard for
catching frequency? I don't think so.
Result is, surprisingly, my personal "the best" in all cases (except
of QSO points).
Thanks to all TOP banders who took part!
Used equipments:
Yaesu FT-1000MP MarkV Field
ACOM 2000A
MicroHAM microKeyer
DXLog
Antennas:
160m: Vertical (35m tower + 2 elevated radials)
RX: K9AY
73!
Riki, OM7RU
www.tucek.sk/om7ru
Posted using 3830 Score Submittal Forms at: http://www.3830scores.com/
______________________________________________
3830 mailing list
3830@contesting.com
http://lists.contesting.com/mailman/listinfo/3830
|