And finally with this BIG DIN-BURGER-STORY, I still wasn't able to find
a 8 pin DIN that fits in my FT1000mp to pick-up the band change Data.
Be aware, the 7 pins are NOT in a circle, and the eight pin is NOT in
the center.
Who can solve this real problem ?
Thanks for a shout.
Jos on4kj
-----Message d'origine-----
De : amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] De
la part de Bill Turner
Envoyé : samedi 25 février 2006 17:19
À : amps@contesting.com; Pete Smith
Objet : Re: [Amps] DIN stands for....?
On Saturday, February 25, 2006 4:51 AM [GMT+1=CET],
Pete Smith <n4zr@contesting.com> wrote:
> One more drawback of the Molex connectors that I've run into - if a
> wire comes adrift from its pin after the pin has been inserted in the
> plug body, I have been unable to find any way to reverse the process
> and get the pin back out to recrimp or resolder. Annoying at best.
>
> 73, Pete N4ZR
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is an extraction tool for Molex pins. I have one here somewhere.
It is
nothing more than a hollow cylinder which fits tightly over the pin and
compresses the little flanges (or whatever they are called) that retain
the
pin. Works great.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|