The 7/16 in a 7-16 DIN connector is not inches. The center pin is
actually 7MM in diameter. The inside of the connector is approximately
16 MM. A 7-16 DIN connector was devolved for/under the DIN 47223
standard.
Please see: http://www.deltarf.com/pdf/Delta716.pdf
They are designed for low return loss (SWR) and high frequency. Up to
7.5 GHz. They also have a low PIM (passive inter modulation) They were
developed for the demanding wireless industry.
DX engineering makes one that is rated at 10 KW with N connectors.
www.dxengineering.com
Array Solutions also makes a 10-20 KW model.
Why would you need a switch that handles this much power?
73
Jim W7RY
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of Barrie Smith
Sent: Thursday, June 29, 2006 6:24 PM
To: amps@contesting.com
Subject: [Amps] QRO Coax Switches
Anyone know of a source for coax switches capable of handling "above
average power"?
7/16" DIN connectors would be a plus.
TNX,
Barrie, W7ALW, DN36au,
QRV 6M, 432 & 1296 EME
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|