This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C0D184.4CD9BC00
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello List Members,
First I would like to thank everyone for helping me. Its alot easier for =
me to explain what I propose to do and have someone correct my mistakes. =
Here is what I propose to do. Tube YC156. I plan on using a filament =
choke(without centertap xformer). On the transformer side of the choke I =
will bypass each side to grnd. On the filament side of the choke I will =
place a cap across the choke. On the side of the filament thats tied to =
the cathode is where my drive power will enter thru a coupling cap. The =
bias choke will attach at the same point. Someone please correct any =
mistakes that I have made. I have never worked with a tube where one =
side of the filament was tied to the cathode internally. Sorry about the =
long post.
Regards to All Jeff KD4LYH
------=_NextPart_000_0005_01C0D184.4CD9BC00
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.3018.900" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hello List Members,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>First I would like to thank everyone =
for helping=20
me. Its alot easier for me to explain what I propose to do and have =
someone=20
correct my mistakes. Here is what I propose to do. Tube YC156. I plan on =
using a=20
filament choke(without centertap xformer). On the transformer side of =
the choke=20
I will bypass each side to grnd. On the filament side of the choke I =
will place=20
a cap across the choke. On the side of the filament thats tied to the =
cathode is=20
where my drive power will enter thru a coupling cap. The bias choke will =
attach=20
at the same point. Someone please correct any mistakes that I have made. =
I have=20
never worked with a tube where one side of the filament was tied to the =
cathode=20
internally. Sorry about the long post.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Regards to All Jeff=20
KD4LYH</FONT></DIV></BODY></HTML>
------=_NextPart_000_0005_01C0D184.4CD9BC00--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|