Amps
[Top] [All Lists]

Re: [Amps] 4PR1000 initial run up?

To: "Andy GD0TEP" <andy@gd0tep.com>, <amps@contesting.com>
Subject: Re: [Amps] 4PR1000 initial run up?
From: "Carl" <km1h@jeremy.mv.com>
Date: Sat, 31 Oct 2009 21:02:11 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Be brave, hit it with 5KV with a big glitch resistor and HV fuse!
If its really a 97 it should be fine. Cook it at a medium red for an hour to 
degas whatever little bit may be there.

Carl
KM1H



----- Original Message ----- 
From: "Andy GD0TEP" <andy@gd0tep.com>
To: <amps@contesting.com>
Sent: Saturday, October 31, 2009 7:01 PM
Subject: [Amps] 4PR1000 initial run up?


> Hi to the group.
>
> I recently acquired what I believe to be a new, old stock 4PR1000a with 
> what
> looks like a 97 date code.
>
> I've had the tube with heaters on for the last 24 hours (plus blower)
>
> What's the preferred or recommended method to bring the HV on?
>
> 73 Andy
> http://www.gd0tep.com
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>