----- Original Message -----
From: <PLoret1648@aol.com>
To: <amps@contesting.com>
Sent: 17 November 2002 12:04
Subject: [Amps] 4cx350f/j's
> Any of you fellas ever apply these to a project for amateur amplification?
Is
> there any disadvantage to the 26.5 volts on the heater, or does it just
heat
> quicker? Not much info on Rell's page via Richardson's Electronics. Let me
> know.
I think the 26.5V suited the military's 24V nominal preferred supplies. As
best I recall, the heater power is the same as in the 6V version, so the
warm up time is the same.
They go very nicely up to 2m, but watch the control grid - no dissipation to
speak of allowed.
Steve
|