You could almost make with an 4cx350, Give it some 2800V, and it'll still
live for a long time, and a relatively clean 325-340W.
a 4cx250? no way, it'll max out at 300W, if you want decent life, and if you
want to be a good neighbour. With 2000V you wont be even close, 280W tops of
clean AB1 output.
Vy 73 de OZ1PIF, Peter
********** OZ1PIF **************
email: oz1pif(no-spam-filler)@get2net.dk
http://hjem.get2net.dk/oz1pif
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
----- Original Message -----
From: "GGLL" <nagato@arnet.com.ar>
To: "Amplificadores Lineales" <amps@contesting.com>
Sent: Sunday, October 26, 2003 2:34 PM
Subject: [Amps] About single 4CX250b output power
> Hello to the list, I want to know if is it possible to obtain 350
> watts output from 160 to 10 with a single 4CX250b tube, for linear
> amplifier service, and which working class? AB1, AB2?; 2000 Plate volts
> maximum is needed?.
>
> Best reagrds
> Guillermo - LU8EYW.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|