Hi Rich,
you might be right Richard! But since that time we still have the replaced
tube. The visible difference between those two tubes was that the bad one
has silver plated anode collar and the working one is nickel plated! Taken
that the cooling (air pressure ) is the same, could it be that one dissipate
heat easier then the other one? Or, as somebody noted before, abuse by
inexperienced operators??
Nermin S58DX
----- Original Message -----
From: "R. Measures" <r@somis.org>
To: "Fortra" <fortra@siol.net>
Cc: "Jose E. Ribeiro Sa" <zemurtosa@mail.telepac.pt>; <amps@contesting.com>;
"Keith Dutson" <kdutson@sbcglobal.net>
Sent: Wednesday, October 05, 2005 9:59 PM
Subject: Re: [Amps] Ameritron AL-1500 Problem
>
> On Oct 5, 2005, at 9:01 AM, Fortra wrote:
>
>> Hi Jose,
>>
>> the problem you have described remind me about similar case waaay back in
>> 80's. Our Alpha 77dx did the same thing on several occasions. It was find
>> later after removal from the socket and replacement with new one, that
>> the
>> connection between the heater internally was void. If you shake the tube
>> it
>> will show the connection red on multimeter. Quite some years has elapsed
>> since we learned that EIMAC did have some bad batch of tubes.
>
> The heat dam problem caused the 8877's heater to open?
>
>> Our amp was
>> produced in 1980. Yeah, there are some weird stories how you can
>> literally
>> weld the heater connection back, using AC in series with bulb but I
>> honestly
>> do not recomended. Jose, swallow up and buy the GS35B. The rest it
>> stayed,
>> could be used to entertain your partner!!
>>
>> Best regards,
>>
>> nermin S58DX
>> ----- Original Message -----
>> From: "Jose E. Ribeiro Sa" <zemurtosa@mail.telepac.pt>
>> To: "Keith Dutson" <kdutson@sbcglobal.net>; <amps@contesting.com>
>> Sent: Wednesday, October 05, 2005 4:09 PM
>> Subject: Re: [Amps] Ameritron AL-1500 Problem
>>
>>
>>> Thank you Keith
>>> Yes I just tested it with a second tranceiver and its the same.
>>>
>>>
>>> 73 Jose CT1EEB
>>>
>>> ----- Original Message -----
>>> From: "Keith Dutson" <kdutson@sbcglobal.net>
>>> To: <amps@contesting.com>
>>> Sent: Wednesday, October 05, 2005 1:31 PM
>>> Subject: Re: [Amps] Ameritron AL-1500 Problem
>>>
>>>
>>>> Sounds like a TR relay problem, such as sticking or intermittent
>>>> ground.
>>>> Have you checked the TR connection from the transceiver? Do you have a
>>>> second transceiver? If so, does the problem continue with the other
>>>> transceiver?
>>>>
>>>> 73, Keith NM5G
>>>>
>>>> -----Original Message-----
>>>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
>>>> On
>>>> Behalf Of Jose E. Ribeiro Sa
>>>> Sent: Wednesday, October 05, 2005 8:19 AM
>>>> To: amps@contesting.com
>>>> Subject: [Amps] Ameritron AL-1500 Problem
>>>>
>>>> Good afternoon
>>>> Maybe some of you can give me a clue about this problem Iam
>>>> experiencing
>>>> with my Ameritron AL-1500 amp.
>>>>
>>>> A couple of days ago I switched on the AL-1500 and when I started TXing
>>>> there was no output power at all (zero watt), the HV was OK (3300
>>>> Volts),
>>>> but no IP and power mesurements in the meter. Theres an ALC reading.
>>>>
>>>> I thought in could be some kind of bad contact in the 8877 lamp so I
>>>> took
>>>> it
>>>> off cleaned the lamp socket metal contacts put in on again and the
>>>> Linear
>>>> amp. was working ok at full power. === so far so good ===
>>>>
>>>> Next day when I turned it on is WAS NOT TXing again, the problem was
>>>> still
>>>> there but after some tries the amplifier started transmitting at full
>>>> power
>>>> again and worked all day long.
>>>>
>>>> This morning again the same, but this time its not transmitting at all,
>>>> I
>>>> tried to to see if I could detect any malfunction but nothing, all
>>>> seems
>>>> OK,
>>>> the amp. seems to be working ok, but no Power out no matter what I do.
>>>> I also noticed that the impedance between the radio and the amp has
>>>> changed
>>>> because SWR in the radio is way too high (and before the match was
>>>> perfect
>>>> without SWR).
>>>>
>>>> I will apreciate your feedback and ideas about what might be
>>>> originating
>>>> this problem.
>>>>
>>>> 73 Jose CT1EEB
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>
> Richard L. Measures, AG6K, 805.386.3734. www.somis.org
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|