Amps
[Top] [All Lists]

Re: [Amps] Unknown tube amp

To: Verner Topsøe-Jensen OZ5TG <oz5tg@post2.tele.dk>,<amps@contesting.com>
Subject: Re: [Amps] Unknown tube amp
From: "Fortra" <fortra@siol.net>
Date: Sun, 12 Dec 2004 23:14:48 +0100
List-post: <mailto:amps@contesting.com>
Hi Chris,

could it be VT4C the tubes used in BC-610F transmitters??!
There were 4 of them, could not remember the exact function of the other two??


Nermin S58DX
----- Original Message ----- From: "Verner Topsøe-Jensen OZ5TG" <oz5tg@post2.tele.dk>
To: <amps@contesting.com>
Sent: Sunday, December 12, 2004 10:21 PM
Subject: Re: [Amps] Unknown tube amp



Chris,


Do You know the heater voltage ?

OZ5TG, Vern

----- Original Message ----- From: "Mike Sawyer" <w3slk@uplink.net>
To: "Chris Howard" <chris@yipyap.com>; <amps@contesting.com>
Sent: Sunday, December 12, 2004 10:12 PM
Subject: Re: [Amps] Unknown tube amp



I'm just kind of curious whether it may be a socket for a 3A200. These were
pretty much used in the old FAA A-and-N transmitters. The unusual thing was
they had a 3-pin base and 2 grid connections on the envelope. A old friend
of mine, now an SK, had a large supply of these and we were contemplating
using them in an AM transmitter.
Mike(y)
W3SLK
----- Original Message ----- From: "Chris Howard" <chris@yipyap.com>
To: <amps@contesting.com>
Sent: Sunday, December 12, 2004 2:48 PM
Subject: Re: [Amps] Unknown tube amp





Here are the pictures!


www.yipyap.com/radio_stuff/PA-1.jpg  is the front
www.yipyap.com/radio_stuff/PA-2.jpg  is the side
www.yipyap.com/radio_stuff/PA-3.jpg  is the back
www.yipyap.com/radio_stuff/PA-4.jpg  is to get
 an idea of the height of the tube.  Notice the
 hanging plate cap connector at about 9 inches
 and the side cap thing at around 4-5 inches
www.yipyap.com/radio_stuff/PA-5.jpg  is a picture
 of the tube socket.  The socket is white ceramic, that's
 hard to see in the photo.

Thanks!

Chris
kc0atc

p.s.  taking that down-the-socket shot was kind of tricky.
  I ended up getting a good exposure with my cheep-o
  digital camera by covering the flash with a couple layers
  of kleenex, setting the camera to macro, and shooting
  blind a few times.  It's sure a lot easier to experiment
  with a digital camera, just throw the duds away!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>